Skip to main content
AEG | Help and Support

Oven displays error message C1 ,C2, C3, C4

If your oven displays error message C1 ,C2, C3, C4, refer to the suggestions below for step by step instructions.

 

DISPLAY CODE

DESCRIPTION 

TROUBLESHOOTING 

C1 (*) 

Telescopic rails during pyrolytic treatment.

Remove the telescopic rails and all accessories from the oven compartment before activating the pyrolytic function. 

C2 (*) 

The cooking thermometer is in the connector during the pyrolytic treatment. 

Remove the cooking thermometer before activating the pyrolytic function. 

C3 (*) 

Open door during the pyrolytic treatment. 

If the door is open, you cannot perform the pyrolytic treatment. 

Close the oven door before the pyrolytic function is activated.

C4 (*) 

The Plus steam button is activated while switching on the pyrolytic treatment. 

Press the Plus steam button again to unselect Plus steam before switching on the pyrolytic function.

 

If the problem persists, we recommend requesting a visit by a service engineer.

You can request a visit by one of our engineers by clicking on the link below.