Skip to main content
AEG | Help and Support

Oven displays demo - Avantgarde PCB

Demo Mode in Avantgarde PCB User Interface:
  1. Switch on the power on the oven and set the language and time.
  2. When the oven’s display is off (the clock displays the time), hold the on/off button for 3–4 seconds. The display will turn on and off again.
  3. Within 2 seconds, hold the timer/cooking thermometer button and the (minus) button for 3–4 seconds. 2 beeps will sound.
  4. Switch on the oven. A small clock symbol will be shown on the right side of the display. This indicates that the oven is connected to the demo function.
  5. The display can now be used, without starting the oven.

Take the oven out of demo mode by following the above section 2 and 3.

  • Was this article helpful?
Oops... There was an issue resolving your request


There was an issue resolving your request.

Please try the following:

  1. Refresh the web page.
  2. Make sure you have entered the correct web address.
  3. If all else fails, please check back at a later time.

Thank you for your patience and we apologize for any inconvenience.