Skip to main content
AEG | Help and Support

Tumble dryer does not switch on after a drying cycle

Issue:
  • Tumble dryer does not switch on after a drying cycle. It indicates a technical problem with the appliance.
Applies to:
  • Vented dryer
  • Condenser dryer
  • Heat pump dryer
Resolution:

1. Contact an Authorized Service Centre

We recommend requesting a visit by a service engineer.

NOTE: Depending on the problem, you may be charged for a service visit by an engineer, even during the warranty period.

Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.