- Washing machine emits noises and shakes while spinning
- Front loader washing machine (integrated and freestanding)
- Top loader washing machine
1. Make sure that the transit bolts are removed from the back of the appliance
- Use a spirit level to check whether the machine is level on all its feet.
- The appliance must be stable on a level, hard floor.
- You can adjust the feet using a spanner.
- It is important that the appliance does not “rock”, otherwise, it will vibrate while spinning.
3. Make sure that all the hoses are securely fitted and attached to the back of the appliance’s housing
Loosely fitted hoses can vibrate against the appliance during spinning, producing a “knocking” noise.
4. Check if the laundry is loaded correctly and make sure that there is no fabric caught between the door and drum
5. Check the filter if the machine has one that is visible
Loose coins, lighters, buttons or other small objects can get stuck in the drain filter. You can get instructions on how to clean the filter from the user manual.
6. Check the holes for loose straps from bras in the drum / between the drum sections
7. Check if the noises are not the result of normal appliance operation
Normal noise – can occur anywhere during a wash. This noise can be caused by buckles and zips knocking against the window, vibrations during spinning, the pump and motor running, water inflow during filling cycles, a heating element which is warming up, fans operating during drying cycles (washer dryers only), beeps coming from the electronics when changing cycle, starting and ending a wash.
REMEMBER: A single item can make the appliance unbalanced during spinning in the same way as an overloaded drum can.