Skip to main content
AEG | Help and Support

The vacuum cycle is stopped within a few seconds and the button flashes

 

Issue:
  • The vacuum cycle is stopped within a few seconds and the button button.png  flashes
  • Air remains in the bag
Applies to:
  • Vacuum sealer
Resolution:

1. Clean the cover gasket with soft cloth and mild detergent

2. Close the cover correctly. Make sure that objects or dirt are not found between the cover and tank

3. Contact an Authorized Service Centre if:

  • The cover gasket is worn or damaged
  • The sealing bar is worn (the Teflon coating is burnt).
  • The blade placed under the Teflon of the sealing bar is broken

 

  • Was this article helpful?