Skip to main content
AEG | Help and Support

Oven blows / trips fuses

Issue:
  • oven / cooker continuously blows / trips the fuse
Applies to:
  • integrated oven
  • freestanding cooker 
Resolution:

1. Make sure that the fuse is sufficient for the power load

Check with your electrician if you have the right fuse size and if the hob is connected to a separate fuse group.

2. Check if the appliance is correctly connected to the electrical supply

Ensure a correct installation by calling an authorized installer.

3. Contact an Authorized Service Centre

If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.

NOTE: Depending on the problem, you may be charged for a service visit by an engineer, even during the warranty period.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.

Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.

 
  • Report error code: BE
 
  • Was this article helpful?